AR - 119 Anti-Rust (White / Blue )

AR – 119 Anti-Rust (White / Blue )

AR-119 was developed as a protective agent for metal moulds against rust, moisture and corrosive vapors. The formula contained corrosion inhibitors that will adhere firmly on the metal surface at normal temperature to give a waxy film which forms a barrier against oxidative, acidic and alkali environment.

SKU: White Anti-Corrosion Agent Formula 119 Categories: , Tags: , , , , ,

Description

Product Name

:

WHITE/BLUE ANTI-RUST
Product Code:AR-119
Packing:24 cans/box

 

PRODUCT DESCRIPTION:

AR-119 (WHITE/BLUE ANTI-RUST)

  • AR-119 was developed as a protective agent for metal moulds against rust, moisture and corrosive vapors. The formula contained corrosion inhibitors that will adhere firmly on the metal surface at normal temperature to give a waxy film which forms a barrier against oxidative, acidic and alkali environment.

PRODUCT PROPERTIES:

  • AR-119 which is non-greasy, will dry to a soft film on the metal mould surface within several minutes after spraying.
  • AR-119 was formulated to give metal mould a grease-free and oil free surface after allowing the mould to run for a few injection cycles before actual production.
  • This process helps to reduce set-up time and resume production sooner.
  • Alternatively it can be cleansed by common solvents or it can be wiped off using a soft cloth or tissue paper.
TYPICAL PHYSICAL & CHEMICAL PROPERTIES:
Specific Gravity (conc.): 0.93
Flash Point (conc.): < 0ºC, Closed Cup
Appearance: Transparent White
Flammability (conc.): Flammable

 

RECOMMENDED FILM THICKNESS FOR INDOOR RUST PROTECTION:

3 months – 0.3 mm6 months – 0.4 mm1 year – 0.5 mm

Please take note that the above figures indicate mainly for the spray thickness on the mould surfaces.

 

DIRECTION OF USE:

  1. Shake the can before spraying.
  2. Adjust spraying distance to give good even coverage.
  3. Spraying from a distance of about 6 inches gives the best coverage. For better anti-rust protection, spray thicker coating.
  4. To achieve even coverage, spray from left to right and do not spray at one area for too long.
  5. It is important before spraying AR-119 that the mould surfaces be clean and does not contaminate with metal dust, water vapor and fingerprints. These are attributes of rust formation.

 

CAUTION:
Do not spray near any fire or sparkling point, neither should it be stored near area with temperature above 40ºC. If accidentally swallowed, call for medical help immediately. For skin contact, wash thoroughly with water and soap. Contents under pressure. Do not puncture or incinerate container. Keep out of reach of children.

Reviews

There are no reviews yet.

Be the first to review “AR – 119 Anti-Rust (White / Blue )”

Your email address will not be published. Required fields are marked *

Related products