Formula 700 (Non-Silicone Mould Release)

0 out of 5 based on 0 customer ratings

Non-Silicone Mold Release SL-17 was developed as a non-silicone release agent suitable for precision injection and compression moulding for thermoplastic and some thermoset materials.

Add to Wishlist
Compare
SKU: Non-Silicone Mold Release Formula 700 Categories: , Tags: , , ,
Share this:

Enquiry about Formula 700 (Non-Silicone Mould Release)

Enter the security code shown above

Infomation

Description

Product Name

:

FORMULA 700 MOULD RELEASE
Product Code :NON-SILICONE BASE MOULD RELEASE
Packing :24 cans/box

 

Product description:

FORMULA 700 (MOULD RELEASE)

  • Non-Silicone Mold Release SL-17 was developed as a non-silicone release agent suitable for precision injection and compression moulding for thermoplastic and some thermoset materials.
  • It is a vegetable base release agent for a drier, less oily releasing particularly for transparent plastic materials. It will eliminate any stress cracking and crazing when moulding polyethylene.  
  • It is good for moulding parts which require further processing such as silk screening, lacquer spraying, lamination, heat sealing and electroplating. 
  • It gives a clean finishing on the moulded parts.  Some of the plastic materials that can be used with Formula 700 are: Acetal, ABS, Acrylic, Polyethylene, Polypropylene, Polysulfone and Nylon.
  • This formulation does not contain ozone depleting chemicals and it is biodegradable.
  • The release agent is a food approved material.
  • This formulation is safe on solvent sensitive plastics and will not interfere with bonding. It is important for users to always test any release agent with a particular resin or polymer.

PRODUCT PROPERTIES:

  • Paintable.
  • Suitable for metal hot stamping.
  • Permits ultrasonic welding of plastics parts.
Typical Physical & Chemical Properties:
Specific Gravity (25°C): 0.7 (concentrate)
Flash Point: < O degree C
Appearance: Amber, transparent
Flammability: Flammable
Operating Temperature: 260°C max
Evaporation Rate: Fast drying solvent
DIRECTION OF USE:

  1. Make sure the mold surface is clean.
  2. Spray evenly from a distance of 15 to 20 cm to obtain good overage.
  3. Do not over spray. Excessive spraying will not necessarily give better results.
  4. Determine and tryout spraying distance for each different application.
CAUTION :

  • Contents under pressure. Do not spray near any fire or sparkling point.
  • Do not store or expose the aerosol container to temperature above 50°C.
  • Do not pierce or burn the container. Use in well ventilated areas.
  • Avoid breathing the vapor and do not over spray.
  • Keep out of the reach of children.

PRODUCT ENQUIRY FORMULA 700 (NON-SILICONE MOULD RELEASE)

Related Products

X